Raspberry Pi活用/Yocto設定

ビルド

tools-debug

//~/yocto$ git clone -b kirkstone git://git.yoctoproject.org/poky
//~/yocto$ . poky/oe-init-build-env
//~/yocto$ bitbake-layers layerindex-fetch meta-raspberrypi
~/yocto$ git clone git://git.yoctoproject.org/poky
~/yocto$ cd poky
~/yocto/poky$ git checkout kirkstone
//~/yocto/poky$ git checkout scarthgap
~/yocto/poky$ cd ..
~/yocto$ git clone git://git.yoctoproject.org/meta-raspberrypi
~/yocto$ cd meta-raspberrypi 
~/yocto/meta-raspberrypi$ git checkout kirkstone
~/yocto/meta-raspberrypi$ cd ..
~/yocto$ . poky/oe-init-build-env
~/yocto/build$ bitbake-layers add-layer ../meta-raspberrypi

~/yocto/build/conf/local.conf

MACHINE ?= "raspberrypi4-64"

~/yocto/build$ bitbake core-image-minimal

~/yocto/build$ bitbake core-image-sato -c clean
~/yocto/build$ bitbake core-image-sato
~/yocto/build$ bitbake core-image-sato -c listtasks

$ sudo bmaptool copy core-image-minimal-raspberrypi4-64.wic.bz2 /dev/SDX
//$ sudo bmaptool copy core-image-sato-raspberrypi4-64.wic.bz2 /dev/SDX

bitbake-layers show-layers

部分ビルド

$ bitback myapp
$ bitback -c cleansstate myapp

<nowki>

build/tmp/work/x86-64-linux/openssl-native/1.0.2o-r0/temp$ ./run.do_compile </nowiki>

qemu

$ runqemu qemu86-64 nographic

SDK

~/yocto/build$ bitbake core-image-sato -c populate_sdk
//~/yocto/build$ bitbake meta-toolchain

~/yocto/build/tmp/deploy/sdk/poky-glibc-x86_64-core-image-sato-cortexa72-raspberrypi4-64-toolchain-4.0.17.sh

$ . /opt/poky/4.0.17/environment-setup-cortexa72-poky-linux

$ pkg-config --list-all

USBブート

local.conf

CMDLINE_remove = "root=/dev/mmcblk0p2"
CMDLINE_append = "root=/dev/sda2"